Saturday, September 25, 2010

6 ways of doing locking in .NET (Pessimistic and optimistic)

Introduction
Why do we need locking?
How can we solve concurrency problems?
What kind of confusion is caused because of concurrency?
So how can we solve the above problems?
What is Optimistic locking?
How does optimistic lock work?
What are the different solutions by which we can implement optimistic locking?Solution number 1:- Datasets
Solution number 2:-Use timestamp data type
Solution number 3:- Check old values and new values
But it looks like by using optimistic locking concurrency problems are not really solved?
What is pessimistic locking?
How can we do pessimistic locking?
What kind of locks can be acquired by using pessimistic locking?
The update lock is confusing can you explain in detail?
So what are the different types of isolation levels and when should be used when?
How can we specify Isolation?
Which transaction isolation level solves which problems from Concurrency?
Solution 4:- Can we see how dirty reads are solved using Read Committed?
So is Read uncommitted opposite of Read Committed?
Solution 5:- Can we see how lost update and non-repeatable read are solved using repeatable read?
Solution 6:- How are Phantom row problems addressed using Serializable Isolation level?
In what scenarios should we use optimistic and pessimistic locking?
What is a dead lock and how does shared lock avoid the same?
What are Lock hints?


Introduction

This article talks about 6 ways of doing locking in .NET. It starts with concurrency problems and then discusses about 3 ways of doing optimistic locking. As optimistic locking does not solve the concurrency issues from roots, it introduces pessimistic locking. It then moves ahead to explain how isolation levels can help us implement pessimistic locking. Each isolation level is explained with sample demonstration to make concepts clearer.

This is a small Ebook for all my .NET friends which covers topics like WCF,WPF,WWF,Ajax,Core .NET,SQL, Entity framework, Design patterns , Agile etc you can download the same from here
or else you can catch me on my daily free training @ from here

Why do we need locking?

In multi-user environment it’s possible that multiple users can update the same record at the same time causing confusion between users. This issue is termed as concurrency.





How can we solve concurrency problems?

Concurrency problems can be solved by implementing proper “Locking strategy”. Locks prevent action on a resource to be performed when some other resource is already performing some action on it.


What kind of confusion is caused because of concurrency?

There are 4 kinds of major problems caused because of concurrency, below table shows the details of the same.




So how can we solve the above problems?

By using optimistic or pessimistic locking, the further coming article discusses the same.




What is Optimistic locking?

As the name suggests “optimistic” it assumes that multiple transaction will work without affecting each other. In other words no locks are enforced while doing optimistic locking. The transaction just verifies that no other transaction has modified the data. In case of modification the transaction is rolled back.

How does optimistic lock work?

You can implement optimistic locking by numerous ways but the fundamental to implement optimistic locking remains same. It’s a 5 step process as shown below:-

• Record the current timestamp.
• Start changing the values.
• Before updating check whether anyone else has changed the values by checking the old time stamp and new time stamp.
• If it’s not equal rollbacks or else commit.



What are the different solutions by which we can implement optimistic locking?

There are 3 primary ways by which we can implement optimistic locking in .NET:-
Datasets: - Dataset by default implement optimistic locking. They do a
check of old values and new values before updating.
Timestamp Data type: - Create a timestamp data type in your table and
while updating check if old timestamp is equal to new timestamp.
Check old and new value: - Fetch the values, do the changes and while
doing the final updates check if the old value and current values in database
are equal. If they are not equal then rollback or else commits the values.


Solution number 1:- Datasets

As said in the previous section dataset handles optimistic concurrency by itself. Below is a simple snapshot where we held the debug point on Adapter’s update function and then changed the value from the SQL Server. When we ran the “update” function by removing the break point it threw “Concurrency” exception error as shown below.



If you run the profiler at the back end you can see it fires the update
statement checking of the current values and the old values are same.
exec sp_executesql N'UPDATE [tbl_items] SET [AuthorName] = @p1 WHERE (([Id] =
@p2) AND ((@p3 = 1 AND [ItemName] IS NULL) OR ([ItemName] = @p4)) AND ((@p5 =
1 AND [Type] IS NULL)
OR ([Type] = @p6)) AND ((@p7 = 1 AND [AuthorName] IS NULL) OR ([AuthorName] =
@p8)) AND ((@p9 = 1 AND [Vendor] IS NULL) OR ([Vendor] = @p10)))',N'@p1
nvarchar(11),@p2 int,@p3
int,@p4 nvarchar(4),@p5 int,@p6 int,@p7 int,@p8 nvarchar(18),@p9 int,@p10
nvarchar(2)',@p1=N'this is
new',@p2=2,@p3=0,@p4=N'1001',@p5=0,@p6=3,@p7=0,@p8=N'This is Old
Author',@p9=0,@p10=N'kk'

In this scenario we were trying to change the field value “AuthorName” to “This is new” but while updating it makes a check with the old value “This is old author”. Below is the downsized code snippet of the above SQL which shows the comparison with old value.
,@p8=N'This is Old Author'

Solution number 2:- Use timestamp data type

The other way of doing optimistic locking is by using ‘TimeStamp’ data type of SQL Server. Time stamp automatically generates a unique binary number every time you update the SQL Server data. Time stamp data types are for versioning your record updates.



To implement optimistic locking we first fetch the old ‘TimeStamp’ value and
when we are trying to update we check if the old time stamp is equal to the current time stamp as shown in the below code snippet.
update tbl_items set itemname=@itemname where CurrentTimestamp=@OldTimeStamp

We then check if any updates has happened, in case updates has not happened
then we raise a serious error ‘16’ using SQL Server ‘raiserror’ as shown in the below code snippet.
if(@@rowcount=0)
begin
raiserror('Hello some else changed the value',16,10)
end

If any concurrency violation takes place you should see the error propagated
when you call ‘ExecuteNonQuery’ to the client side as shown in the below figure.


Solution number 3:- Check old values and new values

Many times we would like to check concurrency on only certain fields and omit fields like identity etc. For those kind of scenarios we can check the old value and the new value of the updated fields as shown in the below code snippet.

update tbl_items set itemname=@itemname where itemname=@OldItemNameValue

But it looks like by using optimistic locking concurrency problems are not really solved?

Yes, you said right. By using optimistic locking you only detect the concurrency problem. To solve concurrency issues from the roots itself we need to use pessimistic locking. Optimistic is like prevention while pessimistic locking is actually the cure.


What is pessimistic locking?



Pessimistic locking assumes that concurrency / collision issues will happen so a lock is placed on the records and then data is updated.


How can we do pessimistic locking?

We can do pessimistic locking by specifying “IsolationLevel” in SQL Server stored procedures, ADO.NET level or by using transaction scope object.


What kind of locks can be acquired by using pessimistic locking?

There are 4 kinds of locks you can acquire Shared, Exclusive, Update and intent. The first two are actual locks while the other two are hybrid locks and marker.




The update lock is confusing can you explain in detail?

The other locks are pretty straight forward; the update lock is confusing because of its hybrid nature. Many times before we update we read the record. So during read the lock is shared and while actually updating we would like to have an exclusive lock. Update locks are more of transient locks.


So what are the different types of isolation levels and when should be used when?

There are 4 kinds of transaction isolation level, below is a simple table which shows when to use them and what locks they put.



How can we specify Isolation?

Isolation levels are features of RDBMS software, in other words they fundamental really belong to SQL Server and not to Ado.NET, EF or LINQ. Said and done that you can always set the transaction isolation level from any of these components.



Middle tier
In middle tier you can specify isolation level using transaction scope object.
TransactionOptions TransOpt = New TransactionOptions();
TransOpt.IsolationLevel = System.Transactions.IsolationLevel.ReadCommitted;
using(TransactionScope scope = new
TransactionScope(TransactionScopeOption.Required, TransOptions))
{

}







ADO.NET

You can also specify transaction isolation level using “SqlTransaction” object in ADO.NET.

SqlTransaction objtransaction =
objConnection.BeginTransaction(System.Data.IsolationLevel.Serializable);

SQL Server
You can also specify isolation level in TSQL using ‘SET TRANSACATION ISOLATION LEVEL’ as shown in the below code snippet.

SET TRANSACTION ISOLATION LEVEL READ COMMITTED;

Which transaction isolation level solves which problems from Concurrency?

Below is a chart which shows which transaction isolation level solves which problems of concurrency.




Solution 4:- Can we see how dirty reads are solved using Read Committed?

Some important Key points about read committed:-
• It’s the default transaction isolation level for SQL Server.
• Its reads only committed data. In other words any uncommitted data is not read and blocked until the commit happens. Below figure explains the same in more detail. You can see the update




If you want the see above things practically do the following:-
• Open 2 Query windows fire an update transaction but do not commit.

• In the second window try firing select query it will show a blocked query as
shown in the below figure.


So is Read uncommitted opposite of Read Committed?


Yes, read uncommitted is opposite to read committed. When you set the
transaction isolation level to read uncommitted, uncommitted data is also read.
Some important key points for read committed:-
• Uncommitted is see so dirty read possible.
• No locks held.
• Useful when locking is not important and more important is concurrency and
throughput.
If you want to test the same, fire the below SQL statement which is doing an
update and roll back. The roll back happens after 20 seconds halt. Within that
time if you fire a select query you will get the uncommitted data and after 20
seconds you will see the old data this committed data is rolled back.
set transaction isolation level read uncommitted
Begin Tran

Update customer set CustomerName='Changed' where CustomerCode='1001'
WAITFOR DELAY '000:00:20'
rollback tran


set transaction isolation level read uncommitted
select * from Customer where CustomerCode='1001'

Solution 5:- Can we see how lost update and non-repeatable read are solved using repeatable read?

By setting isolation level to repeatable read no one can read and update the data. Some key points about repeatable read isolation level are as follows:-


• Only committed data is read when repeatable transaction isolation level is
set for select queries.
• When you select a record using repeatable read no one other transaction can
update the record. , but selects are possible.
• If repeatable transaction is set in update query, until the transaction
finishes no one can read or update the same.
• When select and update query is set to repeatable read other transaction can
insert new records. In other words phantom rows are possible.

If you want to test this isolation level, fire the below syntax and try firing
select and update queries they will be blocked and after 50 seconds you should
see the data.

set transaction isolation level repeatable read
Begin Tran
Update customer set CustomerName='Changed' where CustomerCode='1001'
WAITFOR DELAY '000:00:50'
rollback tran
If you fire the below select query in repeatable read mode you will not be able to update for 50 seconds until the transaction finishes.

set transaction isolation level repeatable read
begin tran
select * from Customer where CustomerCode='1001'
WAITFOR DELAY '000:00:50'
commit tran

One important note you can add new records of customer code 1001, in other
words phantom rows are possible.

Solution 6:- How are Phantom row problems addressed using Serializable Isolation level?

This is the highest level of isolation level; in this other transactions cannot update, select and insert records.


Some key points for serializable transaction are:-
• No other transaction can insert, update, delete or select when isolation level
is serializable.
• Lot of blockings but all concurrency issues are solved.
set transaction isolation level serializable
begin tran
select * from Customer where CustomerCode='1001'
WAITFOR DELAY '000:00:50'
commit tran

In what scenarios should we use optimistic and pessimistic locking?

Working…


What is a dead lock and how does shared lock avoid the same?

Still working…


What are Lock hints?

Still working…










Friday, September 10, 2010

.Net 4.0 MEF अक्सर किये जानेवाले सवाल (Socket , Plug & Extension

.NET 4.0 MEF अक्सर किये जाने सवाल (Socket , Plug & Extension)


परिचय & लक्ष्य


यह article में एक नए feature के बारे में लिखा गया है। MEF जिसका full form है Manage Extensibility Framework, और यह नया feature .Net 4.0 में introduce किया गया है।

MEF क्या है?


MEF एक framework है , इस framework का उपुयोग करके आप अपने application को extensible बना सकते है। उद्धरण के लिए एक accounting application है , आप चाहते हो की आपका accounting application कोई external vendor लेकर इसमे invoice capabilities जोड़े , आप अपने accounting application में एक हूक देंगे ताकि कोई भी vendor इसमे अपनी invoicing capabilities जोड़ सके। एक वाक्य में कहा जाये तो MEF एक framework है जिससे आप अपने application को extensible बना सकते है ।




4.0 Net, में कैसे MEF हम कर सकते है लागु?


MEF की capabilities लाने के ३ steps hai..


१ ) Import (बनाये Socket) :- आपको अपने application को में एक असा Socket बहार से देना पड़ेगा जिसे आपके वेंडर आपके external users उस Socket में connect कर सके, तो आपको import attributes करके वोह socket बनाना पड़ेगा ।
२) Export ( प्लग जोड़े) :- आपके vendors एक असा प्लग बनायेंगे जो यह socket में connect हो सके।
३) Compose ( यह लिखे) :- दोनों socket और plug को जोड़ कर अपने application को extensible करो।



अब socket बनाने के लिए आप Import attributes इस्तिमाल करोगे जो .Net 4.0 में दिया गया है। आपके जो plug बनाने के आपके vendors export attributes इस्तिमाल करेंगे, और आखरी में आप composition container use करके import और export को connect करो। इन ३ steps को मिलाकर हम एक simple सा .net application लिखेंगे एक console application और उसमे हम import, export और connect करने का प्रयत्न करेंगे।